PV Ribbon Machine
copper flat wire cold rolling mill and annealer with tinned machine
PV ribbon machine is mainly used to manufacturing flat wire from 0.4-0.8 mm roud wires, with rolling, annealing and tinning.
The whole line including:
1. Active pay-off machine,
2. 106 cold rolling machine,
3. Thickness measuring machine
4. 200 annealing machines
5. Hot tinning machine
6. Accumulating machine
7. Double position take-up machine
8. Electrical control cabinet.
The advantages of rolling annealing and tinning machines:
1. Automatic measuring wire thickness,
2. With defect automatic monitoring device, ensuring product quality
3. Evenly tinning, tinning thickness freely adjusting by air knife
4. Fully sealing of hot tinning part, reduce the tinning smoke
5. Finished wire yield strength between 50 Mpa and 60 Mpa.
6. With tin shortage alarming system
|
Rolling power |
4kw |
|
|
Annealing current
|
300A/MAX |
|
|
Motor of take-up |
750w |
|
|
Rows of servo motor |
750w |
|
|
Annealing power |
10kw |
|
|
Rolling wheel diameter |
106mm |
|
|
Wire inlet size |
Φ0.1~Φ1.2mm |
|
|
Finished flat wire size |
width:0.25~3mm |
tolerance:±0.015~0.03mm |
|
Thickness:0.02~1.0mm |
tolerance:±0.003~0.005mm |
|
|
Rated speed |
100-120m/min |
|
|
Maximum speed |
200m/min |
|
|
Elongation |
15-35% |
|
|
Vickers hardness |
45-55degree |
|
|
Press roll form: double roller |
||
|
Take-up pan: P4,DIN355
|
||
|
With constant voltage and current annealing process under gas protection
|
||
|
Tin plating machine |
|
|
Using |
Product solar energy PV ribbon tin-plate |
|
Production range |
Can plate all kinds of lead or lead-free,tin,tin lead,tin lead solder and so on |
|
Plate thickness |
10-60u |
|
Bending strength |
≤60-80(after annealing) |
|
Speed |
90-150m/min |
|
Tin stove power |
8KW |
|
Tin plating tank capacity |
180KG |
|
Voltage |
380V |
|
Maximum size |
160mm |
|
Wire inlet size |
width:0.4-8mm copper flat wire
|
|
Thickness:0.08-0.5mm |
|
|
Wiring way |
single and independent ribbon cable Preheat and annealing component Directly tin plating system Servo control air brush Cooling method,special air knife
|
|
Using water |
20L/min |
|
The leading wheel power:1HP introduction motor cooperate with frequency convers |
|
Recommend Product